Bush hammer on trapezoid plate for coating removal and concrete texturing

Z-LION BH01 Bush hammer comes with universal trapezoid plate to fit most of the floor grinding machines in the market. The tool is widely used to pulverize old surfaces interiorly and exteriorly. Interiorly, bush hammer works great for removal of coatings and for exposing large aggregates; Exteriorly, the tool is widely used to create a bush-hammered profile on concrete to get anti-slip or decorative finish.


  • Model No: ZL-BH01
  • Material: Carbide tips
  • Teeth: 30 or 45
  • Connection: Trapezoid plate
  • Product Detail

    Product Tags

    Product Introduction

    Comes with universal trapezoid back plate, this bush hammer can be used on most of the floor grinding machines.
    Bush hammer roller comes with 2 rows(30 teeth) or 3 rows (45 teeth) of carbide tips.
    Conical carbide tips on the roller keep rotating and hitting on the concrete floor to create bush-hammered surfaces.
    Bush hammer is widely used to pulverize old surfaces interiorly and exteriorly. Interiorly, bush hammer is used to remove coatings such as elastic epoxy, resin, carpet glues, thin-sets etc. It can ideally expose aggregates and leave even textured new substrate. Exteriorly, bush hammer creates bush-hammered profile on concrete floor to get anti-slip or decorative surface.

    Product Advantages

    Z-LION BH01 Bush hammer is an ultra aggressive concrete texturing tool for concrete floor preparation. The special features of bush hammers are as follows:
    Bush hammers are a one-step method for stripping, cleaning and profiling of concrete surfaces in preparation for epoxy coatings and self-leveling or polymer overlays.
    Bush hammers are cost-effective. High quality carbide tips welded onto the roller professionally. The inside of the bush hammer roller is made of bearing, sleeve, spring washer and filled with grease. The roller always rolls smoothly. Wax is used to seal the roller to prevent dust going into the bearing and stop the roller. Frame which to hold the roller bolted to trapezoid plate via 4 stout screws, no break under repeated hitting. Roller can be replaced when carbide tips are used out.
    Bush hammers produce very little airborne dust, and it doesn’t micro fracture the surface.

    Product Applications

    Bush hammer is widely used to pulverize old surfaces interiorly and exteriorly. Interiorly, bush hammer works great for removal of coatings and for exposing large aggregates; Exteriorly, the tool is used to create a bush-hammered profile on concrete to get anti-slip or decorative surface.

    QQ图片20210826141648
    maxresdefault (2)
    Bush hammer (2)
    Bush hammer (3)
    Bush hammer
    Bush hammer (4)
    zlion
    03(2)
    01(3)

  • Previous:
  • Next: