PCDs and Bush Hammers
-
PCD concrete grinding tool for Lavina floor grinding machines
Z-LION PCD-20 Poly Crystalline Diamond (PCD) concrete grinding tool is designed to be used on Lavina floor grinding machines for aggressive removal of stock and coatings such as epoxy, glue, paint, resin, etc. from a concrete floor. The tool comes with two 1/4 quarter round PCD and a diamond sacrificial bar. Clockwise and counterclockwise direction are both available.
-
Z-LION PCD grinding trapezoid heavy duty coating removal trapezoid with three half round PCD
Z-LION PCD-21 three half round PCD grinding trapezoid is a heavy duty coating removal tool for removing thick and elastomeric coatings like epoxy, urethane, polyurethane, polyaspartic, acrylic, glue residue, etc. The tool has 3 half round PCD and a button supporting segment. Comes with typical trapezoid plate, can be mounted to a wide variety of floor grinders via the 3 holes on the trapezoid plate. Designed to work in a specific direction, either clockwise or counterclockwise.
-
PCD cup wheel for coating removal in concrete floor preparation
PCD cup wheels are commonly used for removing various of thick and elastomer coatings like epoxy, resin, mastic, residues of carpet glues, thin-sets and so on. Mainly used on hand-held grinders to work on edges, corners where floor grinders are hard to reach, plus anywhere we can reach. This 5inch cup wheel with 6 quarter round PCDs is an excellent edge tooling for concrete floor preparation.
-
PCD coating removal tool for HTC grinding machine
PCD（short for Polycrystalline Diamond）is ideal material for coating removal as it is ultra rough. PCD coating removal tool for HTC grinding machine are designed to be used on HTC floor grinders for removing various coatings such as epoxy, glue, paint, waterproofing, adhesive and screed residues etc. This tool comes with a 1/4 PCD, a round carbide and a rectangular segment.
-
Bush hammer on trapezoid plate for coating removal and concrete texturing
Z-LION BH01 Bush hammer comes with universal trapezoid plate to fit most of the floor grinding machines in the market. The tool is widely used to pulverize old surfaces interiorly and exteriorly. Interiorly, bush hammer works great for removal of coatings and for exposing large aggregates; Exteriorly, the tool is widely used to create a bush-hammered profile on concrete to get anti-slip or decorative finish.
-
Bush hammer on wedge-in Lavina plate for texturing and grinding concrete floors
Bush hammer on wedge-in plate for Lavina floor grinder are widely used for pulverizing the surface of concrete floor to get aggregate exposure, for texturing and grinding concrete floors to get decorative finish or anti-slip finish or for coating removal. It is an ultra aggressive tool for concrete floor preparation.
-
Trapezoid PCD coating removal tool for scraping coatings on concrete floors
Trapezoid PCD grinding discs are the most aggressive concrete floor grinding tools. Mainly used for removing thick epoxy coatings on the surface of concrete floors. Two 1/4 quarter round PCD and one rectangle wear bar on trapezoid is an excellent choice when removing heavy coatings. Clockwise and counterclockwise rotational direction are interchangeable.
